Walk In Cold Room / Incubator / Humidity (Stability) Chamber

Wall In Cold Room

A Cold Room the interior of which is maintained at below ambient temperature, typically well below freezing point. We can store wide range of product from at temperature 0°C up to 20°. In cold Room there are automatic defrost by utilizing a heater to defrost the condenser coils, which cycles on and off, preventing any ice build-up.
Such ineffective solutions lead to excursions in temperature conditions that affect the quality of the stored material over a period in time.
Cold Rooms can be utilized for multiple applications in the Pharmaceutical, Cosmetic, Food & Beverages, Dairy & other industries for all kinds of products intended for storage at low temperatures.

Construction

  •  SS 304 Interior &Extenor either SS 304 or Powder Coated (G.l.)
  •  Double walled with 125 mm PUF insulated modular panels with easy on-site assembly
  •  System is made up of split type condenser unit in well-ventilated area to avoid throw of hot air in the room
  •  Illuminated working area
  •  Power supply: 230/415 volts 50 Hz main supply. Also available with 60 Hz Cycle.
  •  CFC free cooling system consisting of hermetically sealed compressor coupled with evaporation coil & condenser
  •  All operations through a single 4" Color Touch Screen
  •  High speed Ethernet based communication
  •  Audio/Visual alarms for deviations

    • Specification

    Temperature Range 2°C to 8°C
    Temperature Accuracy ± 0.5°C
    Temperature Uniformity ± 1°C

    Optional Accessories

  •  Digital Temperature Controller / Indicator, Audio Temperature Alarm, Strip Curtains, Inner Storage Racks etc...
  •  Door Access system
  •  Mobile Alert System
  •  Remote alarm system suitable for 4 nos. Newtronic make equipments
  •  Stand by Cooling System with auto switch overs

    • Walk –In Incubator

    HMG Walk-In-Incubator is medium to large sized versions of growth &storage of bacterial cultures, gentle incubation & conditioning and Media Preparation.They are supplied at customer-site in a knock-down condition & can pass through standard sized doorways. They are assembled on-site.


    Specification

    Temperature Range +5°C to 60°C
    Temperature Accuracy ± 0.5°C
    Temperature Uniformity ± 1°C

    Construction & Features

  •  Double walled with 80mm PUF insulated modular panels with easy on-site assembly
  •  SS 304 Interior & Exterior either SS 304 or Powder Coated G.I.
  •  Stainless Steel trays
  •  Observation window - 300 x 300 mm
  •  Illuminated working area
  •  U-shaped SS tubular heaters
  •  Safety devices: Low & High temperature cut-off settable thermostats
  •  Audio/Visual alarms for deviations
  •  CFC free cooling system consisting of hermetically sealed compressor coupled with evaporation coil & condenser
  •  Complete operations driven through PLC with data logging capacity of up to 1000 readings & email facility
  •  Power supply: 230/415 volts 50 Hz main supply. Also available with 60 Hz Cycle.
  •  Forced air circulation for uniform temperature

    • Construction & Features

  •  Digital Temperature Controller / Indicator, Audio Temperature Alarm, Strip Curtains, Inner Storage Racks etc.
  •  Door Access system
  •  Mobile Alert System
  •  Remote alarm system suitable for 4 nos. Newtronic make equipments
  •  Stand by Cooling System with auto switch overs

    • Walk-in-stability (Humidity) Chamber

    HMG Stability Test Chamber is specially designed to carry out stability & shelf list test on drug & drugs substance/product varies with time under the influence of a variety of environmental factors suchas temperature and humidity in large quantity. Hence stability test chamber is also known as Environmental Test Chamber.
    These are medium to large-sized chambers that are custom-built to ensure that they not only fit optimally in your lab's stability area but also address your large-scale stability testing requirements.


    Applications

  •  Conditioning of samples.
  •  Accelerated shelf life studies.
  •  Stability testing for Drugs & Pharma industries.
  •  Climate conditioning.
  •  Defense and Aerospace industries.
  •  Testing electronic/ Electrical components as per IS, IES, JSS, & Mil standards.

    • Construction & Features

  •  Inner S. Steel heavy gauge, outer CRCA powder and coated finish.
  •  PUF in-situ foam about 3" thick.
  •  Viewing window (STD) / full view inner door. (To select while ordering)
  •  High efficiency Refrigeration system (CFC Free)*
  •  Humidity Injection System with low water level cut off.
  •  Microprocessor based controller with PID action for Dry/Wet, Direct % RH, safety alarm.
  •  Trays: SS Wire Mesh, Heavy Duty
  •  Long duration Test.
  •  Control Accuracy of temperature & humidity.
  •  Uniformity of conditions throughout the chamber.
  •  Direct display of humidity in % RH.
  •  Pt 100 sensor for dry / wet bulb or capacitance type humidity sensor available.
  •  Printer interface compatibility.
  •  PC interface with RS 232-C / or RS-485 for multiple networking of controller.
  •  Built in high / low conditions alarm.
  •  Low water level cut off device.
  •  Complete stainless steel chamber also available.

    • PORTABILITY

  •  The Light Weight & "Modular Design Assembly" makes it easy to fabricate room of any size.
  •  Dismantling, Enlargement & Relocation of the room is equally quick & easy.

    • METAL FINISH

  •  24 G Prepainted CRCA / GI Powder coat finish / stainless steel / Aluminium.

    • RESISTANCE

  •  Chemical resistance : The panels are totally resistance to chemical agents & hence suffer no damage due to reaction.
  •  Water Resistance: The Panels are water resistant.
  •  Fire Resistance : The panels are excellent fire retardant.

    • MAINTENANCE PROOF

  •  The Sturdy design & long lasting finish ensures negligible or minimum maintenance for years.

    • WIDE RANGES

  •  Light Weight Panel available in various following sizes to suit a variety of applications.
  •  Thickness: 60/80/100/120/150mm (To suit application)
  •  Height : 1.8/2.25/2.8/4.6 Meters (To suit customer's Space availability/needs)
  •  Width : 600/900/1000mm.

    • DATA RECORDING FACILITIES

  •  1) Circular (Daily/Weekly) or Strip Chart (Continues) Recorder.
  •  2) Printer Interface compitable to 80 column DOT Matrix printer (EPSON/WIPTRO)
  •  3) PC Interface through RS 232 - C/RS 485 for multiple networking of controllers.
  •  4) Window based Software for reports in Tubular / Tabular/Graphical form.
  •  5) Validation: HMGoffers validation protocols for DQ, IQ, & PQ documentation.